Strip Terminator AOD

Strip Terminator AOD

For the EXTREME Enthusiast

Part# 7000-AOD-STR

Proven to 1500 h.p. / 1000+ lb/ft

Overview

The Strip Terminator transmission is recommended for aggressive street setups or race applications. Thanks to the patented Rev/3rd technology, torque capacity is greatly increased in this transmission through the application of both the 3-4 and reverse clutch assemblies in third gear (typically the weak link in most automatics). Overdrive however is always limited to 550lb/ft. The Strip Terminator also incorporates a billet 31 spline input shaft. Operation of the optional transbrake is only possible in manual first position and should be used for no longer than 5 seconds. Usage of this transmission is the same as for a non-lock Street Terminator. Because of fixed line pressure, installation of auxiliary transmission oil coolers are necessary with as large a capacity as space allows.

Specifications

· Quality selected core, completely stripped, all major components washed and inspected for excessive wear
· Pump modified for better lube and cooler flow
· Clutch cylinders modified for extra clutches
· 31 modifications in strategic areas for efficient clutch operation and life·
· 7 or 8 "high energy" 3-4 clutches
· 4 "high energy" intermediate clutches
· 6 or 7 "high energy" forward clutches
· 4 or 5 "high energy" reverse/direct clutches
· New 2" wide O/D band
· New mechanical diode intermediate one-way clutch and spiral lock assembly
· Stamped reverse drum for 2" wide band
· All new seals, gaskets, and filter
· Lentech 1,2,3/4 Valve Body with patented Rev/3rd and electric O/D delete
· New oil pan and bolts
· Re-assembled with all critical clearances adjusted for high performance/racing use
· Billet 1-piece input shaft
· Cast gray finish
· All complete units are dyno tested to insure a quality product
· Lifetime LTD. Warranty

Available Convertors

· 10" non-lockup ) Part# 7902-CONV-10
· 9.5"(non-lockup ) Part# 7902-CONV-95
· 8" ( non-lockup )Part# 7902-CONV-8

Available Upgrades
FRPP Wide-Ratio Gearset Part# 7A398-4R70-286 
Custom Bellhousing Options Part# 7976-AOD-****
Manual transbrake valvebody Part#7000-OPT-STRB